Guide to Completing the Insurer Solvency Return

Guide to Completing the
Insurer Solvency Return
Insurance Oversight
Prudential Supervision Department
V3 (18 February 2015)
Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Contents
Purpose of this guide.................................................................................................. 4
Key to this guide ......................................................................................................... 4
Contact details for Insurance Oversight ..................................................................... 4
Introduction ................................................................................................................ 5
Suggested order to complete the return ..................................................................... 6
Solvency standards .................................................................................................... 7
Cover .......................................................................................................................... 8
Part 1 - Insurer ........................................................................................................... 9
[1.1] Capital exemption and solvency conditions of licence ........................................ 9
[1.2] Capital result ...................................................................................................... 9
[1.3] Solvency margin and solvency ratio ................................................................... 9
[1.4] Target capital.................................................................................................... 10
[1.5] Consolidated solvency results .......................................................................... 11
[1.6] Projected solvency ........................................................................................... 12
[1.7] Balance sheet reconciliation ............................................................................. 13
[1.8] Commentary ..................................................................................................... 14
[1.9] List of supporting documents supplied with this return ..................................... 14
Part 2 - Life ............................................................................................................... 15
[2.1] Statutory Funds and Life Funds solvency conditions of licence ....................... 15
[2.2] Life Solvency Margin and Solvency Ratio ........................................................ 15
[2.3] Life Actual Solvency Capital ............................................................................. 15
[2.4] Life Minimum Solvency Capital ........................................................................ 16
[2.5] Life Insurance Risk Capital Charge .................................................................. 16
[2.6] Life Catastrophe Risk Capital Charge .............................................................. 16
[2.7] Life Reinsurance Recovery Risk Capital Charge ............................................. 16
[2.8] Life Asset Risk Capital Charge ......................................................................... 17
Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
[2.9] Life commentary ............................................................................................... 17
Part 3 – Non-life ....................................................................................................... 18
[3.1] Non-life solvency conditions of licence ............................................................. 18
[3.2] Non-life Solvency Margin and Solvency Ratio .................................................. 18
[3.3] Non-life Actual Solvency Capital ...................................................................... 18
[3.4] Non-life Minimum Solvency Capital .................................................................. 18
[3.5] Non-life Insurance Risk Capital Charge ........................................................... 18
[3.6] Non-life Catastrophe Risk Capital Charge ........................................................ 19
[3.7] Non-life Reinsurance Recovery Risk Capital Charge ....................................... 20
[3.8] Non-life Asset Risk Capital Charge .................................................................. 20
[3.9] Non-life Foreign Currency Risk Capital Charge ............................................... 20
[3.10] Non-life Interest Rate Capital Charge ............................................................. 20
[3.11] Non-life commentary ...................................................................................... 21
Part 4 – Variable Annuities ....................................................................................... 22
Sign-off ..................................................................................................................... 23
[1] Actuary statement ............................................................................................... 23
[2] Auditor statement ................................................................................................ 23
Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Purpose of this guide

1. The purpose of this document is to assist insurers in completing the Reserve
   Bank of New Zealand’s (the “Reserve Bank”) Insurer Solvency Return.
2. This document is not a guide to interpreting any solvency standard or solvency￾related condition of licence.
3. This guide may be updated from time to time. The Reserve Bank’s insurance
   website (http://www.rbnz.govt.nz/regulation_and_supervision/insurers/) has the latest version.
4. Nothing in this guide overrides the provisions of the Insurance (Prudential
   Supervision) Act, Regulations, Solvency Standards or Guidelines.
5. Current version:
   Guide Insurer Solvency Return Solvency standards V3 (18 February 2015) V3 (18 February 2015) As at 01 January 2015
6. Prior versions:
   Guide Insurer Solvency Return Solvency standards V2 (20 November 2013) V2 (20 November 2013) As at 20 November 2013 Not applicable V1 (31 January 2012) As at 31 January 2012 Key to this guide
7. In this guide key tips and instructions are highlighted by a box around the
   relevant paragraph, as shown in this paragraph.
8. In this guide references to sheets or sections of a sheet in the Insurer Solvency
   Return are shown shaded in the following format: Part 1 – Insurer [1.5]. The sub-part number is in square brackets. Contact details for Insurance Oversight
9. Phone +64 4 471 3951
   Email insurance@rbnz.govt.nz
   Secure upload https://sup.rbnz.govt.nz/send/ (please select subject of “Insurer Reporting & Returns”) Or contact your supervisor. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Introduction
10. Before completing a solvency return, please check the Reserve Bank website
(at http://www.rbnz.govt.nz/regulation_and_supervision/insurers/regulation/) for a published later version of the Insurer Solvency Return.
11. Requirements for completing the Insurer Solvency Return includes (and are not
limited to) all of the following:
 Conditions of licence which specify the applicable solvency standard(s) and either a minimum solvency margin or ratio to be maintained;  Solvency standard(s);  Section 121 Notice for Insurer Solvency Return1 ; and  Insurer Solvency Return form.
12. The current version of the Insurer Solvency Return is designed to cater for all
insurers providing the results of their calculations under one or more NZ solvency standard. However it is possible there could be unusual circumstances or new developments for which the Insurer Solvency Return does not cater, or there could be errors in the Insurer Solvency Return form. Please contact us if there are these issues.
13. The Insurer Solvency Return does not provide a means to properly calculate
solvency requirements, and nor did the QIS spreadsheets provided during the initial development of some solvency standards. Solvency calculation workings may be submitted to the Reserve Bank separate to the return, but if doing so please clearly label and annotate so the workings can be easily followed.
14. Requested explanations or comments may be provided either in the Insurer
Solvency Return or in supporting documents that are submitted to the Reserve Bank at the same time as the Insurer Solvency Return (or that were previously submitted), for example in the Financial Condition Report or a workings file. If other documents are used, please provide a reference in the Insurer Solvency Return to the relevant file including section, page or paragraph so the information can be easily found.
15. Insurers that have one or more insurance subsidiaries (located in New Zealand
or elsewhere) must provide both solo and consolidated solvency results. Most of the Insurer Solvency Return form is for solo solvency results. Consolidated solvency results are entered in Part 1 – Insurer [1.5].
16. Please enter all monetary amounts in thousands and rounded to zero decimal
places (e.g. NZ$ 1,234,567 = 1235), in New Zealand dollars. For negative numbers use “-“ in front of the figure and do not use brackets. Note the entry in thousands is a change from the previous versions of Insurer Solvency Return.

1
At the time this guide was updated the Reserve Bank was in the process of issuing a section 121 Notice for Insurer Solvency Return to each licensed insurer that does not have a section 59 solvency exemption notice. These notices will be issued at a suitable date for each insurer through 2015. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
17. The Insurer Solvency Return must be submitted in Excel format so the Reserve
Bank can read in figures. Insurers may optionally submit an additional pdf copy if they require a locked signed off copy of the Insurer Solvency Return. The Insurer Solvency Return contains instructions for submitting the completed form.
18. The Reserve Bank may provide an automated acknowledgment of receipt for
uploaded information. Neither a lack of response nor any feedback should be interpreted as confirmation that the Reserve Bank has accepted the Insurer Solvency Return or any other information submitted meets all requirements.
19. To assist insurers to complete the Insurer Solvency Return and reduce follow
up questions by the Reserve Bank, we have provided tips for some of the requested information. All these tips are of necessity general in nature and may not be applicable for all circumstances.
20. If an insurer or actuary is uncertain on the correct interpretation of a component
of the solvency calculations, please contact the Reserve Bank to clarify the requirements before finalising the Insurer Solvency Return. In addition, a brief comment in the Insurer Solvency Return on the issue that is subject to interpretation will assist the Reserve Bank to provide feedback and, if necessary, to consider whether further guidance or amendment to solvency standards is warranted.
21. If figures provided seem unexpected (“do not look right”) or are obviously
unusual (well outside norms), please provide an explanation in the relevant comment box(es) to reduce the need for the Reserve Bank to ask questions.
22. There are spaces for comments throughout the Insurer Solvency Return. If this
is insufficient please provide a separate file and make a reference to this in the relevant comment box.
23. The solvency figures that are required to be disclosed in financial statements
and on an insurer’s website must match the solvency figures submitted to the Reserve Bank. Therefore, if an insurer has not completed the auditor’s review of the Annual Solvency Return at the time of finalising their full year financial statements, this can result in a need to restate financial statements and update the solvency disclosures. The end-to-end process for the Insurer Solvency Return must be factored into insurer’s processes for full-year and half-year financial reporting. Suggested order to complete the return
24. Part 1 – Insurer [1.1] must be completed first for formulae to work correctly.
Then, complete parts Part 2 – Life, Part 3 – Non-life, and Part 4 – Variable Annuities as relevant. Then complete the remainder of Part 1 – Insurer. Don’t forget both Cover and Sign-off also have to be completed. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Solvency standards
25. Version V3 of the Insurer Solvency Return caters for all of the solvency
standards that are in effect as at 01 January 2015:
 Solvency Standard for Life Insurance Business 2014;  Solvency Standard for Non-life Insurance Business 2014;  Solvency Standard for Captive Insurers Transacting Non-life Insurance Business 2014;  Solvency Standard for Non-life Insurance Business in Run-off 2014;  Solvency Standard for New Zealand Local Government Insurance Corporation Limited 2014;  Solvency Standard for Life Insurance Business;  Solvency Standard for Non-life Insurance Business;  Solvency Standard for Captive Insurers Transacting Non-life Insurance Business;  Solvency Standard for Non-life Insurance Business in Run-off; and  Solvency Standard for Civic Assurance.
26. Some terminology differs in similar solvency standards that were issued at
different dates (e.g. Fixed Capital Amount in the Solvency Standard for Non-life Insurance Business 2014 is the same thing as Minimum Solvency Requirement in the Solvency Standard for Non-life Insurance Business). The Insurer Solvency Return generally uses the terminology from the most recent solvency standard.
27. Some elements have treatment differences in the solvency calculations
between similar solvency standards (e.g. the treatment of Asset Concentration Risk Charge differs between the Solvency Standard for Life Insurance Business 2014 and the Solvency Standard for Life Insurance Business). The Insurer Solvency Return generally uses the treatment from the most recent solvency standard. This affects some sub-totals but should not affect overall solvency results.
28. Only some of these differences are commented on in the Insurer Solvency
Return form and in this guide. Please contact the Reserve Bank if there are differences in terminology or treatment between the Insurer Solvency Return and the applied solvency standard, where the difference appears to given an incorrect result or is not obvious from the context and/or comments provided.
29. At the time this guide was updated it was expected that a new life insurance
solvency standard for variable annuities will be issued early in 2015. The Insurer Solvency Return has space for variable annuities to be added in a subsequent version of the form. Currently there are no inputs for a variable annuity solvency standard. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Cover
30. Please select the insurer name from the drop-down list. If the insurer name is
not included in the drop-down list then select “OTHER please enter insurer name in address box ” and enter the insurer name in the address box. The list of insurer names will be updated in each new version of the Insurer Solvency Return form.
31. Short description (optional) is space for the insurer to use if they wish to identify
the return by more than just the Report Date. E.g. as a draft while it is being prepared or before it is signed off.
32. The type of return is a drop-down input, with options for “Annual” (at end of
financial year), “Half-yearly” (at financial year half-year), and “Other” (for any other date).
33. For an Annual Solvency Return the end date of the previous financial year is 12
months prior to Report Date, unless the insurer has changed balance date. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
Part 1 - Insurer
34. All insurers that provide a solvency return are required to complete Part 1 -
Insurer.
[1.1] Capital exemption and solvency conditions of licence
35. In Part 1 – Insurer [1.1] there are drop-down inputs for exemption to minimum
amount of capital, the applicable life insurance solvency standard (select “N/A” if none applies), and the applicable non-life insurance solvency standard (select “N/A” if none applies).
36. Qualifying small insurers that have an exemption to minimum amount of capital
are required to maintain solvency but have no Fixed Capital Amount.
37. There must be at least one solvency standard applied. The version of each
solvency standard, including dates of issue and latest amendment, are populated based on the selection.
38. The requirement for a minimum amount of capital applies at the insurer level,
not at the level of each type of business covered by a single solvency standard. Minimum amount of capital is an example of where different terminology is used in different solvency standards, and the Insurer Solvency Return uses Fixed Capital Amount as this is the terminology used in the solvency standards that were issued in December 2014. [1.2] Capital result
39. The Insurer Solvency Return includes in Part 1 – Insurer [1.2] the capital result.
This is a check on whether or not the difference between Actual Solvency Capital and Aggregate Minimum Solvency Capital (which is subject to a minimum of Fixed Capital Amount) is a surplus or a shortfall. [1.3] Solvency margin and solvency ratio
40. The Insurer Solvency Return includes in Part 1 – Insurer [1.3] the solvency
results. This is a check on whether or not the difference between Solvency Margin or Solvency Ratio and the applied condition(s) of licence is a surplus or shortfall in respect of each solvency standard requirement. For life insurance there are additional solvency results at Life Fund level in Part 2 – Life [2.2]. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [1.4] Target capital
41. In Part 1 – Insurer [1.4] there are drop-down inputs for the target capital
method, type and result; for the insurer in total and also separately for each solvency standard. A summary of the insurer’s capital target provides additional context for the solvency calculation results. The Reserve Bank does not recommend any particular capital target method or type as this is a decision for each insurer’s board. An absence of an insurer’s method or type from the drop-down does not necessarily have negative connotations.
42. The drop-down options for target capital method are “SM $” (target is based on
a dollar solvency margin level), “SR %” (target is based on a % solvency ratio level), “SM $ & SR %” (target is a hybrid of dollar solvency margin level and % solvency ratio level), and “Other”.
43. The drop-down options for target capital type are “Minimum” (the insurer aims
to be above this level at all times), “Range” (the insurer aims to be within this range at all times), “Average” (the insurer aims to be near this level on average), and “Other”.
44. The drop-down options for target capital result are “well above” (capital is
comfortable above the target level), “at or just above” (capital is neither below nor comfortably above the target level), and “below” (capital is below the target level). These assessments are necessarily subjective.
45. There is a comment box in Part 1 – Insurer [1.8] to explain the capital target
and how it is set.
Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [1.5] Consolidated solvency results
46. In Part 1 – Insurer [1.5] there is a drop-down input to indicate if a consolidated
solvency calculation is required (in accordance with the solvency standard(s)). Where it is required the insurer must maintain solvency on both solo and group bases.
47. For most insurers with consolidated solvency requirements these are no more
onerous than the sum of the solvency requirements for the insurer and its subsidiary insurer(s). Accordingly, only limited reporting of consolidated solvency results are included in the Insurer Solvency Return. This is a change from the previous version of the Insurer Solvency Return which required two forms to be completed – one each for a solo and group basis. The Reserve Bank reserves the right to require additional solvency information on a consolidated basis, and may request a second copy of the Insurer Solvency Return to be submitted using consolidated figures only.
48. The Consolidated (Aggregate) Minimum Solvency Capital input should include
allowance for Fixed Capital Amounts where applicable.
49. If the difference between Consolidated Solvency Margin or Ratio and the
corresponding condition(s) of licence is a shortfall this must be explained in the comment box provided. This includes at individual Life Fund level even though the Insurer Solvency Return has are no numerical inputs for consolidated solvency figures at Life Fund level. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [1.6] Projected solvency
50. In Part 1 – Insurer [1.6] there is a drop-down input to indicate if a section 24
notification is required. If yes, the Reserve Bank must be notified as soon as is practical – do not wait to submit the Insurer Solvency Return to make the notification.
51. Summary results of projected solvency, as well as recent and current solvency
positions, are input in Part 1 – Insurer [1.6]. Aggregate Minimum Solvency Capital must include any applicable Fixed Capital Amount.
52. The projected solvency figures in the Insurer Solvency Return are for the whole
insurer. However, solvency projections must be calculated in sufficient detail to confirm that all solvency requirements are met (i.e. for every solvency standard that applies as well as for every Life Fund in the case of life insurance).
53. Solvency requirements apply continuously and the section 24 obligation to
notify the Reserve Bank is “at any time in the next three years”. This means solvency projections must cover a longer period than three years. The Insurer Solvency Return has flexibility on the dates of projected solvency that are reported, provided the reporting covers at least three years after the date of submission and with annual figures. This means there is a choice between reporting at future end dates of financial years or at 12 monthly intervals from the Report Date, whichever is easiest to provide.
54. The 1 year ago date should be consistent with the approach taken to future
dates. I.e. if future dates are end dates of financial years then the 1 year ago date should be the prior financial year end date, or if future dates are at 12 monthly intervals then the 1 year ago date should be 12 months prior to Report Date.
55. Optimistic solvency projections are not sufficient for ensuring section 24
compliance or for appropriate risk management, because a range of realistic outcomes must be considered.
56. There are comment boxes in Part 1 – Insurer [1.8] to describe the basis of
solvency projections, explain how the section 24 tests are satisfied given solvency results are calculated at discrete times within the projection when the test is for all times in the next three years, explain how the solvency projections are performed with an appropriate frequency given solvency requirements including section 24 are continuous obligations, and explain how compliance with the continuous solvency requirements are adequately monitored and managed. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [1.7] Balance sheet reconciliation
57. The Insurer Solvency Return includes in Part 1 – Insurer [1.7] a reconciliation
between the balance sheet and solvency calculations for net assets, total assets and insurance liabilities net of reinsurance. Any non-zero differences should be explained. There is also a reconciliation of assets in more detail (albeit with some solvency Exposure classes being combined).
58. The balance sheet figures should be from the financial statements or
Alternative Financial Information that is provided to the Reserve Bank, or from the table Balance Sheet Summary in sub-part 1.8 of the Insurer Return form.
59. The solvency return figures are automatically calculated from the relevant
portions of the Insurer Solvency Return and allow for some of the expected adjustments used in solvency calculations. For example, non-qualifying capital is added to Capital included in solvency calculation, and for non-life solvency the Premium Liabilities and Outstanding Claim Adjustments are allowed for to calculate the equivalent balance sheet net insurance liabilities (rather than the prescribed probability of sufficiency figures for solvency calculations).
60. A reported non-zero reconciliation difference may be due to the particular
circumstances of the insurer including its balance sheet presentation (e.g. offsetting of some assets and liabilities), or may indicate an error in the solvency calculations or reporting in the Insurer Solvency Return. Please explain any differences with a further reconciliation where relevant. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [1.8] Commentary
61. Please provide in Part 1 – Insurer [1.8] a comment or explanation on all of the
following topics:
 accounting basis if it is not fully compliant with NZ IFRS or NZ GAAP or where values materially differ from what would have been determined under NZ IFRS or NZ GAAP;  conversion of monetary figures to NZD;  apportionment of assets and liabilities if more than one solvency standard applies (including treatment of any composite policies);  materiality including any approximations that have been applied;  allowance for tax (e.g. if components of solvency calculations have different tax assumptions or treatment, tax impacts of stresses in the solvency calculations, recoverability of tax assets at Report Date and in stressed solvency calculations, use of tax offsets with other companies in a tax group, offsets between tax assets and liabilities);  capital included in the balance sheet that is either excluded or has adjusted value for solvency purposes;  treatment of any derivatives, guarantees, contingent liabilities and charges over assets;  treatment of related party assets and the Exposure Class of “Any other asset”;  Asset Concentration Risk Capital Charges;  any offset of reinsurance assets against reinsurance liabilities;  material concentrations of reinsurer exposures;  basis of projected solvency;  how section 24 tests are satisfied given solvency is projected to discrete times when the test is for all times in the next three years;  how solvency projections are performed with an appropriate frequency given requirements are continuous obligations;  how compliance with the continuous solvency requirements are monitored and managed;  the capital management target and how it is set; and  any other comments. [1.9] List of supporting documents supplied with this return
62. In Part 1 – Insurer [1.9] there is space to list (and label) the supporting
documents that have been supplied with the Insurer Solvency Return (or previously). Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
Part 2 - Life
63. Insurers with an applied life insurance solvency standard (other than variable
annuities) are required to complete Part 2 - Life.
[2.1] Statutory Funds and Life Funds solvency conditions of licence
64. In Part 2 – Life [2.1] there are drop-down inputs for exemption to Statutory Fund
requirements, an indicator for each applicable Life Fund (being Life Funds outside Statutory Funds and up to 3 Statutory Funds).
65. Qualifying insurers with small life insurance business that have utilised an
exemption to Statutory Fund requirements should report all their life insurance solvency figures in the column labelled as “Life Funds outside SF”.
66. There must be at least one Life Fund applied. Insurers with one or more
Statutory Fund(s) may additionally have Life Funds outside Statutory Funds or may have all their life insurance business allocated to the Statutory Fund(s). In the latter case the column labelled “Life Funds outside SF” should be left blank.
67. There is space to input a short label to identify each Statutory Fund.
68. Leave blank the Solvency Margin condition of licence and Solvency Ratio
condition of licence if there is no relevant condition of licence for the particular life fund. For the column titled “Life Funds total” the relevant condition of licence is for the total of all business that is subject to a life insurance solvency standard. Typically life insurers do not have a solvency margin or solvency ratio condition applied to the total of all business that is subject to a life insurance solvency standard (instead the condition is applied to each Life Fund). [2.2] Life Solvency Margin and Solvency Ratio
69. In Part 2 – Life [2.2] the Minimum Solvency Capital at Life Fund level does not
include adjustment for Fixed Capital Amount (FCA).
[2.3] Life Actual Solvency Capital
70. The Insurer Solvency Return has inputs in Part 2 – Life [2.3] for each of the
components of Capital and Deductions from Capital set out in the solvency standards. Some of the components may not be required in the applied solvency standard, in which case leave those blank.
71. Capital excluded from solvency calculation is for the total of balance sheet
capital that is not qualifying, or does not fully qualify, for solvency purposes. This assists to check whether all capital is considered in the solvency calculations and for reconciling with the balance sheet. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [2.4] Life Minimum Solvency Capital
72. There are no inputs in Part 2 – Life [2.4].
[2.5] Life Insurance Risk Capital Charge
73. In Part 2 – Life [2.5] there is a drop-down input for the treatment of reinsurance
in respect of Repayable Amounts. The life insurance solvency standard issued in 2011 does not have Repayable Amounts and so if this solvency standard applies please select “N/A” and leave the amounts blank in the Insurer Solvency Return.
74. The drop-down options are “N/A”, “Nil (ignoring transition)” (there are no
Repayable Amounts at any time), “Transition applied” (there are Repayable Amounts but they fully qualify for the transition provisions in the solvency calculations), and “Ineligible for transition” (there are Repayable Amounts but some or all does not qualify for the transition provisions in the solvency calculations).
75. There is a comment box to explain the treatment of reinsurance in various
liability figures and also for Repayable Amounts.
[2.6] Life Catastrophe Risk Capital Charge
76. In Part 2 – Life [2.6] there is an input for both Pandemic Risk Charge and Other
Extreme Event Charge. If either of these has not been quantified (due to being clearly smaller than the other) please comment in Part 2 – Life [2.9]. [2.7] Life Reinsurance Recovery Risk Capital Charge
77. The Reinsurance Recovery Risk Capital Charge is reported in Part 2 – Life [2.7]
separately to Asset Risk Capital Charge for all insurers. This is consistent with the most recently issued life insurance solvency standard. For insurers that are still subject to older life insurance solvency standards this affects the subtotals reported but not the solvency results.
78. Reinsurance recoveries that are negative value assets are generally excluded
from the Reinsurance Recovery Risk Capital Charge calculation, except to the extent they are able to be offset against other reinsurance assets with the same counterparty (with legal enforceability). However, negative value reinsurance assets are generally included in Insurance Risk Capital Charge calculations. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [2.8] Life Asset Risk Capital Charge
79. In Part 2 – Life [2.8] there is a drop-down input for each Life Fund for the
direction of (interest rate) change that applies (“up”, “down” or “N/A”).
80. The Reinsurance Recovery Risk Capital Charge is reported in Part 2 – Life [2.7]
separately to Asset Risk Capital Charge for all insurers. This is consistent with the most recently issued life insurance solvency standard. For insurers that are still subject to older life insurance solvency standards this affects the subtotals reported but not the solvency results.
81. Related party debt is split into the component that is on commercial terms
(which qualifies for a low charge) and other (which requires a full charge).
82. Any assets that have been protected (in full or in part) by guarantees should be
recorded in the Exposure Class that is relevant for the asset, not the Exposure Class that is relevant for the guarantee. If the guarantee reduces the Resilience Capital Factor from the solvency standard factor applicable to the asset Exposure Class, this should be commented upon in Part 2 – Life [2.9].
83. Implied total absolute value foreign currency exposures are calculated from the
input Foreign Currency Risk Capital Charge to provide a reasonableness check. [2.9] Life commentary
84. Please provide in Part 2 – Life [2.9] a comment or explanation on all of the
following topics:
 description of the business in each Statutory Fund if there is more than one;  description of any business in the Life Fund outside Statutory Funds;  selection of Related Product Groups – this should include an explanation of any differences to the product groups used in financial statement disclosures;  hypothecation of assets;  treatment of any discretions;  allocation of Capital and Deductions from Capital to each Life Fund;  calculation of Insurance Risk Capital Charge;  application at Related Product Group level of CTV minimum, Solvency Liability and Other Liabilities;  allocation of Other Liabilities between Life Funds;  calculation of Catastrophe Risk Capital Charge;  impacts of upshock and downshock stresses at the level of Related Product Group and also at the level of hypothecated portfolio;  an explanation of any material differences between the average Resilience Capital Factors as calculated in the Insurer Solvency Return and the factors in the applicable solvency standard (ignore differences due to rounding);  Exposure Class of “Any other asset”; and  any other comments. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
Part 3 – Non-life
85. Insurers with an applied non-life insurance solvency standard are required to
complete Part 3 – Non-life.
[3.1] Non-life solvency conditions of licence
86. In Part 3 – Non-life [3.1] leave blank the Solvency Margin condition of licence
and Solvency Ratio condition of licence if there is no relevant condition of licence. [3.2] Non-life Solvency Margin and Solvency Ratio
87. In Part 3 – Non-life [3.2] Minimum Solvency Capital does not include
adjustment for Fixed Capital Amount (FCA).
[3.3] Non-life Actual Solvency Capital
88. The Insurer Solvency Return has inputs in Part 3 – Non-life [3.3] for each of the
components of Capital and Deductions from Capital set out in the solvency standards. Some of the components may not be required in the applied solvency standard, in which case leave those blank.
89. Capital excluded from solvency calculation is for the total of balance sheet
capital that is not qualifying, or does not fully qualify, for solvency purposes. This assists to check all capital is considered in the solvency calculations and for reconciling with the balance sheet. [3.4] Non-life Minimum Solvency Capital
90. There are no inputs in Part 3 – Non-life [3.4].
[3.5] Non-life Insurance Risk Capital Charge
91. Due to structural differences in various non-life solvency standards there are
different inputs depending on whether or not any version of the Solvency Standard for Captive Insurers Transacting Non-life Insurance Business applies.
92. The Premium Liability assessment period for some insurers differs from the
period used for accounting purposes for unexpired risk or liability adequacy test. Please justify the assessment period that is used for solvency calculations. The period in which premiums and benefits cannot in practice be adjusted for adverse changes in risk needs to consider more than just the rights of the insurer (policy terms and conditions). It should also include practical matters such as system limitations, notice period requirements, decision making processes, time for preparing communications, lead time for negotiations (e.g. for group health insurance schemes), etc. A comment is requested in Part 3 – Non-life [3.11]. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [3.6] Non-life Catastrophe Risk Capital Charge
93. In Part 3 – Non-life [3.6] there are drop-down inputs for the catastrophe risk
method used and to indicate if the Extreme Event requirement transition as set out in the Policy Position Paper is being utilised (as at Report Date).
94. The catastrophe risk method drop-down options are “N/A”, “Extreme Event”,
“No Extreme Event”, and “Other”. “N/A” should only be used by insurers with a captive non-life solvency standard applied.
95. The Catastrophe Risk Capital Charge covers projected losses for a future
event. Therefore any changes to catastrophe reinsurance cover or the calibration of Extreme Event Exposure that applies after the Report Date must be considered for both current and projected solvency calculations. E.g. solvency calculations at the end of a financial year must allow for any catastrophe reinsurance cover change that applies from the next day (the first day of the next financial year).
96. If the Extreme Event method is used there are inputs for the key components:
 utilisation of the transition provisions in the Policy Position Paper,  assessed losses (gross of reinsurance) for the Extreme Event Exposure,  assessed return period of the limit of catastrophe reinsurance in place,  the limit and excess for catastrophe reinsurance that is in place,  other retention (portion of assessed losses that is not included in the excess and is not above the limit for catastrophe reinsurance in place), and  reinstatement premium for catastrophe reinsurance.
97. If the Extreme Event method is used an explanation is required (at a high level)
on how the requirements have been assessed and the reinsurance allowed for in the solvency calculation. This includes:
 use of catastrophe model(s) or other models,  selection of model output,  allowance for relevant unmodelled losses,  use and reliance on expert judgment,  allowance for future portfolio changes during the period until the next catastrophe reinsurance purchase or renewal, and  the effect of any utilisation of transition provisions as permitted under the Policy Position Paper.
98. If the No Extreme Event method is used there are inputs for 200% of maximum
per risk exposure and reinstatement premium for catastrophe reinsurance. A brief explanation is required on how the maximum per risk exposure was assessed. This should include the catastrophic scenarios (that involve aggregation of losses) that have been considered.
99. If another method is used an explanation is required. The approval of the
Reserve Bank may be required and in any case if another method is intended to be used it is highly recommended that this be discussed with the Reserve Bank well before the Insurer Solvency Return is due to be submitted. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [3.7] Non-life Reinsurance Recovery Risk Capital Charge
100. Reinsurance recoveries that are negative value assets are generally excluded
from the Reinsurance Recovery Risk Capital Charge calculation reported in
Part 3 – Non-life [3.7], except to the extent they are able to be offset against
other reinsurance assets with the same counterparty (with legal enforceability). However, negative value reinsurance assets are generally included in Insurance Risk Capital Charge calculations. [3.8] Non-life Asset Risk Capital Charge
101. In Part 3 – Non-life [3.8] related party debt is split into the component that is on
commercial terms (which qualifies for a low charge) and other (which requires a full charge).
102. Any assets that have been protected (in full or in part) by guarantees should be
recorded in the Exposure Class that is relevant for the asset, not the Exposure Class that is relevant for the guarantee. If the guarantee reduces the Resilience Capital Factor from the solvency standard factor applicable to the asset Exposure Class, this should be commented upon in Part 3 – Non-life [3.11]. [3.9] Non-life Foreign Currency Risk Capital Charge
103. In Part 3 – Non-life [3.9] implied total absolute value foreign currency exposures
are calculated from the input Foreign Currency Risk Capital Charge to provide a reasonableness check. [3.10] Non-life Interest Rate Capital Charge
104. In Part 3 – Non-life [3.10] there is a drop-down input for the direction of (interest
rate) change that applies (“up”, “down” or “N/A”).
Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) [3.11] Non-life commentary
105. Please provide in Part 3 – Non-life [3.11] a comment or explanation on all of the
following topics:
 Insurance Class of “Other”;
 Premium Liabilities Adjustment and Outstanding Claim Liability Adjustment – this should cover treatment of Premium Liability assessment period as well as any differences in the probability of sufficiency between the financial statements or Alternative Financial Information and the requirements of the applicable solvency standard;  the treatment of insurance business with Long Term Risk Characteristics;  impacts of upshock and downshock stresses;  an explanation of any material differences between the average Resilience Capital Factors as calculated in the Insurer Solvency Return and the factors in the applicable solvency standard (ignore differences due to rounding);  Exposure Class of “Any other asset”;  the allowance in Reinsurance Recovery Risk Capital Charge for risk margin at the probability of sufficiency specified in the applicable solvency standard; and  any other comments. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)
Part 4 – Variable Annuities
106. The Insurer Solvency Return has space for variable annuities to be added in a
subsequent version of the form in Part 4 – Variable Annuities. This part is not currently in use. Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015) Sign-off
107. All insurers that provide a solvency return are required to complete the Sign-off.
108. The sign-off of the Insurer Solvency Return is by the CEO or by a person
authorised by the CEO. The separate Certification required by condition of licence has a different sign-off requirement that is not delegable.
109. Under IPSA s215 it is an offence to knowingly make a false or misleading
declaration or representation to the Reserve Bank in any material particular. [1] Actuary statement
110. In Sign-off [1] there is a drop-down input for the involvement of the Appointed
Actuary in the completed Insurer Solvency Return. The drop-down options are “performed”, “reviewed”, and “neither performed nor reviewed”.
111. The name of the Appointed Actuary is input to clarify who is taking the relevant
responsibility if there has been a recent change of person in this role.
112. The Appointed Actuary is required to either prepare or review a completed
Insurer Solvency Return prior to submission to the Reserve Bank, and so an explanation is required if this was not the case. [2] Auditor statement
113. In Sign-off [2] there is a drop-down input for the involvement of the Auditor in
the completed Insurer Solvency Return. The drop-down options are “an audit”, “an audit with exclusions*”, “a review”, “a review with exclusions*”, and “neither an audit nor a review”.
114. Exclusions to the audit of Insurer Solvency Returns that are acceptable to the
Reserve Bank are currently limited to catastrophe risk and solvency projections. Currently means at the time this version of this guide was issued.
115. The name of the Auditor firm is input to clarify who is taking the relevant
responsibility if there has been a recent change of firm in this role.
116. For an Annual Solvency Return the Auditor is required to audit the completed
Insurer Solvency Return prior to submission to the Reserve Bank, and so an explanation is required if this was not the case. No explanation is required in respect of audit for solvency returns at Report Dates other than the end of a financial year. Ends Archived

Guide to Completing the Insurer Solvency Return – V3 (18 February 2015)

Website http://www.rbnz.govt.nz/regulation_and_supervision/insurers/ Email insurance@rbnz.govt.nz Telephone +64 471 3951 Mail Reserve Bank of New Zealand Prudential Supervision – Insurance Oversight PO Box 2498 WELLINGTON 6140 Archived