Completion Instructions for Return of Capital Adequacy Ratio Form MA(BS)3(I)

MA(BS)3(I)/P.1 (06/2021)
Completion Instructions
Return of Capital Adequacy Ratio
Part I – Summary Certificate on Capital Adequacy Ratios
Form MA(BS)3(I)
Introduction

1. Form MA(BS)3(I) is divided into three divisions:
   (a) Divisions A and C – to be completed by all reporting institutions (reporting AIs); (b) Division B – to be completed by reporting AIs using the internal ratings-based approach (IRB approach).
2. Division A is for a reporting AI to provide summary information on its quarter-end
   Common Equity Tier 1 capital ratio, Tier 1 capital ratio and Total capital ratio and the relevant aggregate figures (mainly extracted from other parts of the Return) for computing the ratios. Division B collects information for the determination of the capital floor by a reporting AI using the IRB approach. Division C is for a reporting AI to report information relating to capital buffer requirements applicable to it.
3. This return and its completion instructions should be read in conjunction with the
   Banking (Capital) Rules (BCR) and the relevant supervisory policy/guidance on the capital adequacy framework. Specific Instructions Division A: Calculation of Capital Adequacy Ratios
4. The figures reported for items 1.1 to 1.3, 2.1 to 2.6(ii), 2.8, 2.9 and 2.9a should be
   extracted from other parts of the Return. See Annex I-A for a mapping table on items in this Form and the corresponding items in other Forms.
5. Reporting AIs using the IRB approach, regardless of whether they also use other
   prescribed approaches to calculate credit risk, are not required to complete item 2.5, since the total CVA risk-weighted amount of the AIs reported under Part IIIf has already been incorporated into the AIs’ risk-weighted amount for credit risk (credit RWA) reported under Part IIIc and reflected under item 2.3.
6. Only reporting AIs using the IRB approach are required to complete item 2.10 and item
7. It should be noted that item 2.10 will only be accessible to reporting AIs that use the
   IRB approach, and its value should be equal to item 4 of Division B. In calculating the IRB coverage ratio under item 6, the credit RWA in respect of the relevant reporting AIs’ exposures to central counterparties (CCP) (i.e. item 2.4) are excluded from the denominator.

MA(BS)3(I)/P.2 (06/2021)
7. Item 2.12(i) must be completed by the reporting AI if regulatory reserve for general
banking risks and collective provisions have been made for or apportioned to— (a) its non-securitization exposures that are risk-weighted by using the basic approach (BSC approach) or the standardized (credit risk) approach (STC approach); or (b) its securitization exposures that are risk-weighted by using the securitization external ratings-based approach (SEC-ERBA), securitization standardized approach (SEC-SA) and securitization fall-back approach (SEC-FBA). The AI must report in this item the amount of the above regulatory reserve for general banking risks and collective provisions that exceeds 1.25% of the credit RWA reported under items 2.1, 2.2 and 2.6(ii). To avoid doubts, risk-weighted amount for CCP and CVA, if any, is excluded for the calculation of this 1.25% cap.
8. Item 2.12(ii) refers to the portion of cumulative fair value gains arising from the
revaluation of the AI’s holdings of land and buildings (except land and buildings mortgaged to the reporting AI to secure a debt) which is not included in Tier 2 Capital. For this purpose, whether such amount should be net or gross of deferred tax liabilities will be based on the prevailing accounting standards applicable within a given jurisdiction. Division B: Calculation of Capital Floor
9. A reporting AI using the IRB approach (whether foundation or advanced) for capital
adequacy purposes is subject to a capital floor for the first three years of the adoption of the IRB approach. The use of the capital floor is to prevent a sudden fall in capital charges solely as a result of the changes in how the credit RWA is measured.
10. A reporting AI migrating from the foundation IRB approach (FIRB) to the advanced
IRB approach (AIRB) will generally not be subject to the capital floor if it has already been subject to a capital floor for a period of three years since its adoption of the FIRB. However, a reporting AI that is migrating to the AIRB during the first three years of using the FIRB will need to continue to adopt the capital floor for the remaining period. For example, a reporting AI moving to the AIRB after using the FIRB for two years should continue to be subject to the capital floor in the third year.
11. The Monetary Authority (MA) may require a reporting AI using the IRB approach to
keep the capital floor in place beyond the three-year period or reinstate the capital floor requirement for a reporting AI in the following circumstances- (a) for so long as the MA is satisfied that the prevailing banking supervisory standards relating to capital issued by the Basel Committee require a capital floor to continue to be applied to entities using the IRB approach beyond the first three years of adoption; and (b) where this is deemed appropriate by the MA based on the AI’s circumstances (e.g. IRB compliance problems have emerged pending rectification or possible material prudential concerns on the financial soundness of the AI).

MA(BS)3(I)/P.3 (06/2021)
12. A reporting AI using the IRB approach should indicate whether it is subject to the
capital floor requirement as at the reporting date by answering the filtering question at the top of Division B by inputting either “Yes” or “No”1 . Those AIs which have answered “Yes” should proceed to complete the data table in Division B below the question, while the others should go directly to Division C of the return. (A) Calculation of capital charge for the application of capital floor
13. Subject to paragraph 18, a reporting AI which is subject to the capital floor should
calculate the difference between:
(a) the floor amount of capital (capital floor) as calculated in accordance with paragraphs 14 to 16 (details to be reported under items 1(i) to (x) of Division B); and (b) the actual amount of capital as calculated in accordance with paragraph 17 (details to be reported under items 2(i) to (ix) of Division B). If the floor amount of capital is larger than the actual amount of capital, the AI is required to report the product of such difference and 12.5 in item 4 of Division B and add such amount to the credit RWA (i.e. in item 2.10 of Division A). Otherwise, the figures reported under item 4 of Division B and item 2.10 of Division A should be zero.
14. For a reporting AI that has started to use the IRB approach within the transitional period
from 1 January 2007 to 31 December 2009, the capital floor is derived by applying an adjustment factor (see paragraph 16) to the sum of the following amounts:
(a) 8% of the total RWA2
(to be reported under item 1(v)) as calculated:
(i) for credit risk under the BSC approach or the STC approach3 (to be reported under item 1(i)(a) or (b), as the case requires); (ii) for credit risk in respect of securitization exposures under the SEC-ERBA, SEC-SA and SEC-FBA, whichever is applicable (to be reported under item 1(i)(c)); and (iii) for market risk under the approach in use (i.e. the standardized (market risk) approach and/or the internal models approach) (to be reported under item 1(ii)).

1 By virtue of HKMA circular of 20 December 2013 and related notices issued to relevant AIs under section 225(6) of the BCR, all AIs that use the IRB approach are required to be subject to the capital floor requirement on the ground mentioned in paragraph 11(a). 2 To facilitate a closer comparison with the capital calculation under the current Accord, a reporting AI adopting the IRB approach within the transitional period is not required to include the RWAs calculated for operational risk for the calculation of the capital floor. 3 Subject to the prior consent of the MA, a reporting AI using the STC approach for the calculation of credit RWA before migrating to the IRB approach within the transitional period may use the STC approach as the basis for calculating the capital floor.

MA(BS)3(I)/P.4 (06/2021)
The total RWA is determined by:
Credit RWA + market risk capital charges × 12.5 (b) plus all deductions from the Common Equity Tier 1 capital, Additional Tier 1 capital and Tier 2 capital (to be reported under item 1(vi)); (c) less the amount of regulatory reserve for general banking risks and collective provisions which is included in the Tier 2 capital (to be reported under item 1(vii)).
15. For a reporting AI that has started, or will start, to use the IRB approach after the
transitional period, the calculation of the capital floor is derived by applying an adjustment factor (see paragraph 16) to the sum of the following amounts:
(a) 8% of the total RWA (to be reported under item 1(v)) as calculated:
(i) for credit risk under the STC approach (to be reported under item 1(i)(b)); (ii) for credit risk in respect of securitization exposures under the SEC-ERBA, SEC-SA and SEC-FBA, whichever is applicable (to be reported under item 1(i)(c)); (iii) for credit risk in respect of exposures to CCP in accordance with Division 4 of
Part 6A (the amount reported under item 6 of Part IIIe to be reported under
item 1(i)(d));
(iv) for credit risk in respect of CVA risk to counterparties in accordance with Division 3 of Part 6A (the aggregate of the CVA risk-weighted amounts reported under Part IIIf to be reported under item 1(i)(e)); (v) for market risk under the approach in use (to be reported under item 1(ii)); and (vi) for operational risk under the approach in use (i.e. the basic indicator approach, the standardized (operational risk) approach or the alternative standardized approach) (to be reported under item 1(iii)). The total RWA is determined by:
Credit RWA + market risk capital charges × 12.5 + operational risk capital charges × 12.5 (b) plus all deductions from the Common Equity Tier 1 capital, Additional Tier 1 capital and Tier 2 capital (to be reported under item 1(vi)); (c) less the amount of regulatory reserve for general banking risks and collective provisions which is included in the Tier 2 capital (to be reported under item 1(vii)).
16. The adjustment factors to be used for the calculation of the floor amount of capital by
a reporting AI starting to use the IRB approach within or after the transitional period are set out in the table below, unless the MA has specified another adjustment factor (not exceeding 100%) pursuant to section 225(5)(c) or (6)(c)(i) of the BCR.

MA(BS)3(I)/P.5 (06/2021)
Date of IRB approach implementation
1 st year of implementation
2 nd year of implementation
3 rd year of implementation
Within transitional period
95% 90% 80%
After transitional period4
90% 80% 70%
The AI is required to fill in the applicable adjustment factor in item 1(ix). (B) Calculation of capital charge under the various approaches in use
17. In the years in which the capital floor applies, a reporting AI should also calculate the
actual amount of capital as follows:
(a) 8% of total RWA (to be reported under item 2(v)) as determined under the various approaches in use for (i) credit risk, including credit risk in respect of securitization exposures or exposures to central counterparties where applicable (to be reported under items 2(i)(a), (b), (c), (d), (e) or (f), as the case requires); (ii) market risk (to be reported under item 2(ii)); and (iii) operational risk (to be reported under item 2(iii)). The total RWA is determined by:
Credit RWA + market risk capital charges × 12.5 + operational risk capital charges × 12.5 (b) plus all deductions from the Common Equity Tier 1 capital, Additional Tier 1 capital and Tier 2 capital (to be reported under item 2(vi)), including the shortfall amount (i.e. total EL amount > total eligible provisions) derived from EL-EP calculation (See Section C of the Completion Instructions for MA(BS)3(IIIc)); (c) less the amount of regulatory reserve for general banking risks and collective provisions included in the Tier 2 capital (to be reported under item 2(vii)) if the AI uses the BSC approach, the STC approach, the SEC-ERBA, SEC-SA and/or SEC￾FBA for any portion of its credit exposures; (d) less the surplus amount of provisions under the IRB approach (i.e. where total eligible provisions > total EL amount) included in the Tier 2 capital derived from EL-EP calculation; and the portion of total regulatory reserve for general banking risks and collective provisions relevant to the securitization internal ratings-based

4 Lower adjustment factors are used to take account of the inclusion of operational risk capital charges for the calculation of capital floor after the transitional period (see also footnote 2).

MA(BS)3(I)/P.6 (06/2021) approach (SEC-IRBA) that is included in the Tier 2 capital (to be reported under item 2(viii)). (C) Adjustments to the calculation methods of capital floors
18. Where the MA extends or reapplies the capital floor requirement to a reporting AI using
the IRB approach in the circumstance stated in paragraph 11(a), the MA may specify in a notice to the AI – (a) an adjustment factor (not exceeding 100%) for the purposes of calculating the floor amount of capital; and (b) any other adjustments to the method of calculating the floor amount of capital and the actual amount of capital, which is considered reasonable by the MA to ensure that the capital floor is calculated substantially in accordance with the relevant prevailing banking supervisory standards relating to capital issued by the Basel Committee. Division C: Capital Buffer Requirements
19. A reporting AI is required to observe the following in reporting under this Division:
Item Reporting

1. Net CET1 capital
   ratio5
   Report the ratio, expressed as a percentage, of (a) the amount of the AI’s CET1 capital less the amount of CET1 capital that the AI requires for maintaining (i) the minimum CET1 capital ratio, Tier 1 capital ratio and Total capital ratio applicable to it as set out in section 3B of the BCR and as varied by the MA under section 97F of the Banking Ordinance and (ii) the minimum external or internal LAC risk-weighted ratio (as the case requires) that the AI is required to maintain under the Financial Institutions (Resolution) (Loss-absorbing Capacity Requirements – Banking Sector) Rules, to (b) the sum of the AI’s risk-weighted amount for credit risk, risk-weighted amount for market risk, risk-weighted amount for operational risk and risk-weighted amount for sovereign concentration risk, as determined in accordance with the BCR (i.e. the Total risk-weighted amount as reported under item 2.13 in Division A). Please refer to the illustrative examples in Annex I-B on how to calculate the net CET1 capital ratio.
2. Buffer level Report the buffer level that is applicable to an AI,
   expressed as a percentage and calculated according to

5 Reporting reflects calculation requirement under section 3E(2) of the BCR.

MA(BS)3(I)/P.7 (06/2021)
Item Reporting
section 3G of the BCR –
(a) if the AI is a G-SIB or a D-SIB –
Item 2.1 + 2.2 + 2.3 in this Division; or
(b) in any other cases –
Item 2.1 + 2.2 in this Division.
2.1 Capital
conservation buffer ratio (CB ratio)
Report the CB ratio for calculating an AI’s buffer level under section 3G of the BCR as at the reporting date.
2.2 Countercyclical
capital buffer ratio
(CCyB ratio)
Report the CCyB ratio for calculating an AI’s buffer level under section 3G of the BCR as at the reporting date. The CCyB ratio reported in this item should be consistent with the ratio reported in the cell labelled “CCyB ratio” in column (8) of the Quarterly Reporting on the Countercyclical Capital Buffer (Form MA(BS)25).
2.3 Higher loss
absorbency ratio
(HLA ratio)
Report the HLA ratio notified by the MA as applicable to the AI, if any, for calculating the AI’s buffer level under section 3G of the BCR as at the reporting date. Hong Kong Monetary Authority June 2021

MA(BS)3(I)/P.8 (06/2021)
Annex I-A
Items in MA(BS)3(I) Cross reference with other return forms Division A Division B
1.1 N/A MA(BS)3(II) – Item (E) of Part II
1.1(i) N/A MA(BS)3(II) – Item (B) of Part II 1.1(ii) N/A MA(BS)3(II) – Item (D) of Part II
1.2 N/A MA(BS)3(II) – Item (G) of Part II
1.3 N/A MA(BS)3(II) – Item (H) of Part II
2.1 2(i)(a) MA(BS)3(IIIa) – Item (A9) of Division A
2.2 2(i)(b) MA(BS)3(IIIb) – Item (A10) of Division A
2.3 2(i)(c) MA(BS)3(IIIc) – Item 10 of Division A
2.4 1(i)(d)
2(i)(f)
MA(BS)3(IIIe) – Item 6
2.5 1(i)(e) For AIs not using the IRB approach
MA(BS)3(IIIf) – Item “Total” row of “Risk-weighted Amount” column of Division A + Item 3 of “Risk-weighted Amount” column of Division B For AIs using the IRB approach Division A of Part I: The figure should be zero. Refer to paragraph 5 for details Division B of Part I: MA(BS)3(IIIf) – Item “Total” row of “Risk￾weighted Amount” column of Division A + Item 3 of “Risk￾weighted Amount” column of Division B 2.6(i) 2(i)(e) MA(BS)3(IIId) – Column 1 of item A5(a) of Division A 2.6(ii) 2(i)(d) MA(BS)3(IIId) – Column 1 of items A5(b) and A6 of Division A
2.8 2(ii) MA(BS)3(IV) – Item 3 of Division G
2.9 2(iii) MA(BS)3(V) – Item 5
2.9a N/A MA(BS)3(VI) – Item 2
N/A 2(vi) MA(BS)3(II) –Sum of items (f)(i) to (xxi), items (i)(i) to (v) and items (r)(i) to (viii) of Part II N/A 2(vii) MA(BS)3(II) – Item (o) of Part II N/A 2(viii) MA(BS)3(II) – Items (p) and (q) of Part II

MA(BS)3(I)/P.9 (06/2021)
Annex I-B
Illustrative examples to calculate the net CET1 capital ratio Scenario 1 Suppose Bank A is classified as a resolution entity under the Financial Institutions (Resolution) (Loss-absorbing Capacity Requirements – Banking Sector) Rules (AI LAC Rules). Bank A’s risk-weighted amount is 100 units and it has 15 units of Total capital (comprising 14 units of CET1 capital and 1 unit of Tier 2 capital) and 8 units of non-capital LAC debt resources. Therefore, the CET1 capital ratio, Tier 1 capital ratio, Total capital ratio and external LAC risk￾weighted ratio of Bank A are 14%, 14%, 15% and 23% respectively. Taking into account Bank A’s minimum capital adequacy and loss-absorbency capacity (LAC) requirements (assuming 5.3%, 7.1%, 9.5% and 19% for CET1 capital ratio, Tier 1 capital ratio, Total capital ratio and external LAC risk-weighted ratio respectively in this scenario), the calculation of the net CET1 capital ratio includes the following steps:
Tier of capital /
LAC
CARs of
Bank A
Bank A’s capital requirement5
(as varied under s.97F of the BO)
CET1 capital required to meet Bank A’s capital requirement Remarks CET1 capital 14.0% 5.3% 5.3 units Tier 1 capital 14.0% 7.1% = 5.3 + (7.1 - 5.3) = 5.3 + 1.8 = 7.1 units Since Bank A has no Additional Tier 1 capital, the bank must make use of an additional 1.8 unit of CET1 capital to meet its Tier 1 capital requirement Total capital 15.0% 9.5% = 7.1 + [(9.5 - 7.1) - 1] = 7.1+1.4 = 8.5 units Since Bank A has only 1 unit of Tier 2 capital and no Additional Tier 1 capital, the bank must make use of an additional 1.4 unit of CET1 capital to meet its total capital requirement

MA(BS)3(I)/P.10 (06/2021)
External
LAC risk￾weighted ratio of
Bank A
Bank A’s minimum external
LAC risk￾weighted ratio
(as determined under Part 4 of the
AI LAC Rules)
CET1 capital required to meet Bank A’s
LAC requirement
Remarks
External loss￾absorbing capacity
23% 19% = 8.5 + [(19 – 9.5) – 8]
= 8.5 + 1.5
= 10 units
Since Bank A has only
8 units of non-capital
LAC debt resources with no available
Additional Tier 1 capital or Tier 2 capital
(other than those mentioned above), the bank must make use of an additional 1.5 units of CET1 capital to meet its total LAC requirement Net CET1 Capital = 14.0 – 10.0 = 4.0 units Net CET1 Capital Ratio = 4.0 / 100 = 4.0%

MA(BS)3(I)/P.11 (06/2021)
Scenario 2
Suppose Bank B is classified as a resolution entity under the AI LAC Rules. Bank B’s risk￾weighted amount is 100 units and it has 18 units of Total capital (comprising 14 units of CET1 capital, 2 units of Additional Tier 1 capital and 2 units of Tier 2 capital) and 8 units of non￾capital LAC debt resources. Therefore, the CET1 capital ratio, Tier 1 capital ratio, Total capital ratio and external LAC risk-weighted ratio of Bank B are 14%, 16%, 18% and 26% respectively. Taking into account Bank B’s minimum capital adequacy and LAC requirements (assuming 5.3%, 7.1%, 9.5% and 19% for CET1 capital ratio, Tier 1 capital ratio, Total capital ratio and external LAC risk-weighted ratio respectively in this scenario), the calculation of the net CET1 capital ratio includes the following steps:
Tier of capital /
LAC
CARs of
Bank B
Bank B’s capital requirement6
(as varied under s.97F of the BO)
CET1 capital required to meet Bank B’s capital requirement Remarks CET1 capital 14.0% 5.3% 5.3 units Tier 1 capital 16.0% 7.1% 5.3 units Since Bank B has 2 units of Additional Tier 1 capital, the bank does not need to make use of additional units of CET1 capital to meet its Tier 1 capital requirement Total capital 18.0% 9.5% = 9.5 - 2 - 2 = 5.5 units Since Bank B has 2 units of Additional Tier 1 capital and 2 units of Tier 2 capital, the bank needs to make use of an additional 0.2 unit of CET1 capital to meet its total capital requirement

6 Please refer to subsection 3.5 of the HKMA Supervisory Policy Manual module CA-G-5 Supervisory Review Process for details on the apportionment of the P2A to the three minimum capital ratios (http://www.hkma.gov.hk/media/eng/doc/key-functions/banking-stability/supervisory-policy-manual/CA-G￾5.pdf).

MA(BS)3(I)/P.12 (06/2021)
External
LAC risk￾weighted ratio of
Bank B
Bank B’s minimum external LAC risk￾weighted ratio (as determined under Part 4 of the AI LAC Rules) CET1 capital required to meet Bank B’s LAC requirement Remarks External loss￾absorbing capacity 26% 19% = 19 – 2 – 2 - 8 = 7 units Since Bank B has 2 units of Additional Tier 1 capital, 2 units of Tier 2 capital and 8 units of non-capital LAC debt resources, the bank need to make use of an additional
1.5 units of CET1
capital to meet its total
LAC requirement
Net CET 1 Capital = 14.0 - 7.0
= 7.0 units
Net CET1 Capital Ratio = 7.0 / 100
= 7.0%